|
Chemical Properties |
yellow solid |
|
Chemical Properties |
Depending on purity, a bright yellow or brownish-yellow crystalline solid or powder. Odorless. Soluble in water |
|
Uses |
The ethanolamine salt as a molluscicide. |
|
General Description |
Yellow solid. Insoluble in water. |
|
Air & Water Reactions |
Insoluble in water. |
|
Reactivity Profile |
Niclosamide ethanolamine salt is hydrolyzed by concentrated acid or alkali. |
|
Fire Hazard |
Flash point data for Niclosamide ethanolamine salt are not available. Niclosamide ethanolamine salt is probably combustible. |
|
Agricultural Uses |
Molluscicide: Niclosamide, the parent chemical, is a relatively selective, non-cumulative chlorinated aromatic amide pesticide. Clonitralid (ethanolamine salt of Niclosamide) is used principally against molluscs, especially fresh water snails and to control sea lamprey larvae and also as an antiparasitic drug in human, pets and livestock. Niclosamide is toxic to all fish species at 0.5 mg/L (48 hours). A U.S. EPA restricted Use Pesticide as Niclosamide. Limited to use by a certified applicator [40 CFR 152.175 (a) (7/1/94)]. Not listed for use in EU countries. Registered for use in the U.S. |
|
Trade name |
BAY 73® and U.S. Fish and Wildlife Service; BAY 6076®; BAYER 73®; BAYER 25648®; BAYLUSCID®[C]; BAYLUSCIDE® and U.S. Fish and Wildlife Service; M 73®; MOLLUSCICIDE BAYER 73®; NICLOSAMIDE®; SR 73® |
|
Potential Exposure |
Niclosamide, the parent chemical, is a relatively selective, noncumulative chlorinated aromatic amide pesticide. Clonitralid (ethanolamine salt of niclosamide) is used principally against molluscs, especially fresh water snails and to control sea lamprey larvae and also as an antiparasitic drug in human, pets, and livestock. Niclosamide is toxic to all fish species at 0.5 mg/L (48 hours). A restricted use pesticide in the United States. Limited to use by a certified applicator . Not listed for use in EU countries. |
|
First aid |
If this chemical gets into the eyes, remove any contact lenses at once and irrigate immediately for at least 15 minutes, occasionally lifting upper and lower lids. Seek medical attention immediately. Give artificial respiration if victim is not breathing. Do not use mouthto-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. Administer oxygen if breathing is difficult. Remove and isolate contaminated clothing and shoes. In case of contact with substance, immediately flush skin or eyes with running water for at least 20 minutes. For minor skin contact, avoid spreading material on unaffected skin. Keep victim warm and quiet. Effects of exposure (inhalation, ingestion, or skin contact) to substance may be delayed. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves. |
|
Shipping |
UN2588 Pesticides, solid, toxic, Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required. UN2902 Pesticides, liquid, toxic, n.o.s., Hazard Class: 6.1; Labels: 6.1-Poisonous materials, Technical Name Required. |
|
Incompatibilities |
Incompatible with oxidizers (chlorates, nitrates, peroxides, permanganates, perchlorates, chlorine, bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases, strong acids, oxoacids, epoxides. Hydrolyzed by strong acids, and alkalies. Slowly hydrolyzes in water, releasing ammonia and forming acetate salts. Decomposes at B200-205°C. |
|
Waste Disposal |
Do not discharge into drains or sewers. Containers must be disposed of properly by following package label directions or by contacting your local or federal environmental control agency, or by contacting your regional EPA office. Burn in incinerator specifically designed for pesticide disposal or dispose as a hazardous waste in a landfill approved and licensed for the disposal of pesticides. Consult with environmental regulatory agencies for guidance on acceptable disposal practices. Ultimate disposal of the chemical must consider: the material’s impact on air quality; potential migration in soil or water; effects on animal, aquatic, and plant life; and conformance with environmental and public health regulations |
China (Mainland)
